Table of Contents
Advertisement
'.
Installing Paper
I
_
•
"
•
_
f -
- -
- - -- - - - -.
. - -- . ---- - - - . - . - - - - - - - - -
I
Note:
I •
When Automatic load is set to off in the initial setup mode, press the (LOAD/PARK) switch
I
to load the paper to the first print line .
• When the paper feed selector is in the" [] "position, the buzzer will sound to inform you
I
that the selector is in the wrong position .
• When loading an envelope, if the envelope will not load smoothly, move the paper feed
l
selector to the" [] " position and insert the envelope manually, then move the selector
back to the "
Ll
"position.
--~-~--
-
-
-
- - - -
--- - - - - - - - . - - - -
Characters Alignment
The center of all characters printed on this printer will be aligned with the ribbon mask line (RML).
The RML is a useful marker that shows you exactly where your print line is located.
mask line
Note:
t
---- - - ----
• Rememberthat once you rotate the platen knob, the top of form (TO F) will no longer be recognized.
31
Advertisement
Table of Contents
