Wiring Connection (Kmm-Bt515Hd) - Kenwood KMM-BT515HD Instruction Manual

Wiring connection
(for
IMPORTANT : We recommend installing the unit with a commercially available custom wiring harness specific for your car
and leave this job to professionals for your safety. Consult your car audio dealer.
Antenna terminal
To front speaker (left)
To front speaker (right)
To rear speaker (left)
To rear speaker (right)
Ignition switch
Car fuse box
Car fuse box
Black (Ground wire)
To the metallic body or chassis of the car
Battery
)
Fuse (10 A)
Rear/ front/ subwoofer output
White
White/Black
Gray
Gray/Black
Green
Green/Black
Purple
Purple/Black
Red (Ignition wire)
Yellow (Battery wire)
MIC (Microphone input terminal) ( 16)
Expansion port (12 V 500 mA)
To the optional SiriusXM Vehicle Tuner
(commercially available) ( 13)
If no connections are made, do not let the wire come out from the tab.
Brown
(Mute control wire)
Blue/White
(Power control wire/
Antenna control wire)
Light blue/yellow
(Steering remote control
wire)
When connecting to an external amplifier, connect its ground
wire to the car's chassis to avoid damaging the unit.
To connect the Kenwood navigation system, refer your
navigations manual
To the power control terminal when using the optional
power amplifier or to the antenna control terminal in the
vehicle
To the steering wheel remote control adapter
33
ENGLISH