Basics - Kenwood KMM-BT515HD Instruction Manual

BASICS

Faceplate
Detach button
Attach Detach
To
Turn on the power
Adjust the volume
Select a source
Change the display information*
* 1
For : The power will automatically turn off after 20 minutes when in standby mode (Auto Power Off).
* 2 : You can also turn off the display information by pressing DISP repeatedly.
For
Display window
Volume knob Flashes when the unit enters
searching status.
How to reset
On the faceplate
Press .
• Press and hold to turn off the power. *
Turn the volume knob.
Press repeatedly.
2
Press DISP repeatedly. ( 29)
Remote control (RC-406)
Lights up when
Bluetooth connection is
established. ( 16)
available.
Press the switch twice
within 5 seconds after
detaching the faceplate.
On the remote control
Press and hold SRC to turn off the power.
1 ( Pressing SRC does not turn on the power. )
Press
Press ATT during playback to attenuate the sound.
• Press again to cancel.
Press SRC repeatedly.
( Not available )
Remote sensor (Do not
expose to bright sunlight.)
: Remote control functions are not
How to replace the battery
or .
Pull out the
insulation sheet
when using for
the first time.
3
ENGLISH