Memory Module - HP ProBook 11 G1 Education Edition Maintenance And Service Manual

Reverse this procedure to reassemble and install the solid-state drive.

Memory module

Description
8-GB (PCL3, 12800, 1600)
4-GB (PCL3, 12800, 1600)
2-GB (PCL3, 12800, 1600)
Before removing the memory module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the bottom cover (see
Remove the memory module:
1. Spread the retaining tabs (1) on each side of the memory module slot to release the memory module.
(The memory module tilts up.)
2. Remove the memory module (2) by pulling it away from the slot at an angle.
Reverse this procedure to install a memory module.
32 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page 24).
Bottom cover on page 26).
Spare part number
693374-005
691740-005
691739-005