Standards And Publications; Standards; Publications - Cushman 29175-G01 Owner's Manual And Service Manual

Read all of manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notes, Cautions and Warnings

STANDARDS AND PUBLICATIONS

This unit is not a motor vehicle within the definition of the
National Traffic Motor Vehicle Safety Act. It is not
designed or manufactured for use on roads, streets, or
highways, and is not appropriate for such use. This unit
is not meant to be licensed as a motor vehicle.
The Electric 3 wheel service vehicle is available as Type
"E" and Type "EE" Units. Type "E" Units are electrically
powered units having minimum acceptable safeguards
against inherent fire hazards.Type "EE" Units have addi-
tional safeguards against such hazards.
Users, operators and service persons should be familiar
with the following standards and publications:

Standards

(The material may be obtained from the address shown).
•
Factory Mutual Approval Standard:
Class # 7820; Electric Battery Powered Trucks,
Types E and EE.
ADDRESS:
Factory Mutual Research Corp.
1151 Boston--Providence Highway
Norwood, Massachusetts 02062 USA
•
National Fire Protection Association:
ANSI/NFPA #505; Powered Industrial Trucks.
ADDRESS:
National Fire Protection Association
Batterymarch Park
Quincy, Massachusetts 02269 USA
•
ANSI/ASME B56.8
Personnel and Burden Carriers
ADDRESS:
American National Standards Institute, Inc.
1430 Broadway
New York, New York 10018 USA
ELECTRIC THREE WHEEL SERVICE VEHICLE
Owner's Manual and Service Guide
•
ANSI/UL 583; Electric Battery Powered Industrial
Trucks
ADDRESS:
American National Standards Institute, Inc.
1430 Broadway
New York, New York 10018 USA
OR
Underwriters Laboratories Inc.
333 Pfingsten Road
Northbrook, Illinois 60062 USA
This Electric Vehicle complies with ANSI B56.8 as it
applies to OSHA for Powered Industrial Trucks under the
Type E and EE classifications. This vehicle has been
approved by Factory Mutual Research Corporation. To
meet the manufacturer portions of the OSHA require-
ments (as stated in section 1910.178, Paragraph a3)
Powered Industrial Trucks must bear the approval mark
of either UL (Underwriters Laboratory) or FM (Factory
Mutual) or other nationally recognized testing laborato-
ries.

Publications

Additional operator's manuals and parts manuals are
available for a minimum charge.
Parts Manual 29177-G01
Repair Manual 29178-G01
Thank you for this purchase. The vehicle is equipped
with an electronic speed control unit that is the most
advanced in the industry. Before driving the vehicle, we
ask you to spend some time reading this Owner's Man-
ual and Service Guide. This guide contains information
that will assist you in maintaining your highly reliable
vehicle. Some illustrations may show items that are
optional for your vehicle.
Most of the service procedures in this guide can be
accomplished by an individual using common automotive
hand tools. Refer to an authorized service representative
for information on servicing the vehicle in accordance
with the Periodic Service Schedule.
To facilitate maintenance, a Service Parts Manual and a
Technician's Repair and Service Manual is available
from a local Distributor, an authorized Branch or the Ser-
vice Parts Department. When ordering parts or request-
ing information for your vehicle, provide vehicle model,
serial number and manufacture code.
Page 1