Changhong Electric LE40D307 Operation Manual page 13

Menu Operation
Video
Configuring the
■ Picture Mode: You can select the type of picture which
best corresponds to your viewing requirements.
Picture Mode: Changes the image mode.
Contrast: Adjusts the signal level between black and white
in the picture. You may use Contrast when the bright part
of the picture is saturated.
Brightness: Adjusts the base level of the signal in the
picture.
Sharpness: Adjusts the level of crispness in the edges
between the light and dark areas of the picture.
Tint: Adjusts the balance between red and green levels.
(Only in the NTSC mode)
Color: Adjusts intensity of all colours.
The adjusted values are stored according to the User mode.
■ Color Temperature: Select the color temperature of the
picture.
■ Aspect Ratio: You can select the picture size which best corresponds to your viewi ng
requirements.
■ Noise Reduction: Reduces screen noise without compromising video quality.
■ DBC: Switch the Energy mode on or off.
■ Backlight: To control the brightness of the screen, adjust the brightness of panel.
■ PC Settings (In PC mode)
H.Position: Centre the image by moving it left or right.
V.Position: Centre the image by moving it up or down.
Clock: Eliminates the vertical(CLOCK) interfering lines.
Phase: Adjust when characters have low contrast or when the image flickers.
Auto adjust: Adjust the image automatically.
Audio
Configuring the
■ Sound Mode: You can select a sound mode to suit your
personal preferences.
Mode: Changes the Sound mode.
120Hz/500Hz/1.5KHz/5KHz/10KHz: Adjust the curve
of 5 bands equalizer.
Based on your favorites about which frequency band
need to be adjusted, make small adjustment with certain
frequency band at a time. Suggest not making too la
changes.
The adjusted values are stored according to the User
mode.
Menu
Menu
rge
12