Chapter 11: Channel View : Fx; Introduction; The Swipe Zone - Mackie DL806 Reference Manual

Chapter 11: Channel View : FX

Introduction

The DL Series mixers have one reverb and one delay and these may be fed from any combination of
channels. There are a wide variety of reverb and delay types at your disposal on the Master Fader app.
As seen in the image below, the Master Fader app follows standard FX send and return configuration
so the learning curve is kept to a minimum.
The FX are essentially conjoined, reverb on top, delay just below. The sends and returns for the current
channel are displayed here. This allows you to easily adjust both FX in one convenient location for each
selected channel; channel 1 in this example.

The Swipe Zone

Here in the FX view, swipe anywhere in the gray area outlined above. Swiping up displays that
channel's EQ view. Swiping down displays that channel's gate and compression view. And swiping
left and right changes channels.
Mackie DL806 and DL1608 Reference Guide
75