Mackie DL806 Reference Manual page 15

If you had been mixing with an original iPad or iPad mini, but would rather use an iPad 2, iPad (3rd
generation) or iPad (4th generation), the included iPad tray will need to be reinstalled. The iPad tray
insert only needs to be reinstalled if you are mixing with the iPad 2, iPad (3rd generation) or iPad
(4th generation). Here's how to reinstall the iPad tray:
(1) remove the four screws from the mixer, numbered 1 to 4 in the illustration below.
(2) remove the iPad mini tray insert (if applicable).
(3) slide the included standard tray insert into the mixer as displayed below.
(4) put the screws back into the mixer from where you just removed them to hold the tray insert into place.
1
Tray
The iPad tray insert doesn't need to be locked down If switching regularly between iPads.
Instead, hand-tighten the screws to the mixer before sliding the tray insert back in. This way
they can't get lost and you're still able to slide the tray insert in and out as needed.
2
4
3
15
Mackie DL806 and DL1608 Reference Guide
2
1
3
Tray Insert
4