Force Update Button - Mackie DL806 Reference Manual

Mackie DL806 and DL1608 Reference Guide

Force Update Button

The force update button is tucked in right between the power connector and network connector.
In a perfect world, this button would just sit there without a care in the world, umbrella drink in hand,
beach, surf and sun on a daily basis. In all likelihood, this button will live his / her dream out, while the
rest of us can only dream of such a life.
The DL Series mixers and Master Fader app do a great job at letting you know when either (or both)
the software and firmware need updating, but this button here forces a complete firmware update
if the need ever arrives.
Here's how to force a firmware update: first, turn the mixer off. Now, with a ballpoint pen or a paperclip,
poke the force update button, then power up the mixer with the button depressed. The mixer will boot and
you will be prompted with an update bubble the next time an iPad (with the Master Fader app) is connected
to the mixer.
Now that you know how to force an update, here's a friendly reminder that you should let
the button remain peaceful, calm and tranquil, only forcing a firmware update if instructed
by Mackie Tech Support. Thank you for listening!
Save any current show to your iPad before forcing an update or you may lose it.
The show and your sanity!
24