Polycom CX8000 Quick Tips page 2

Start a Whiteboard
You can start a new whiteboard from your table
console or the touch screen monitor.
1 Select New Whiteboard from the menu.
2 On the touch monitor, select a drawing tool
at the bottom of the monitor, and begin
drawing with your finger.
Change the Display mode
In the Display menu, you can change the display
mode based on the number of screens. The figure
below shows Single display options on the left and
Dual Display options on the right.
Email Meeting Notes
You can email annotated whiteboards in PNG
format directly from the table console. The email is
sent to the meeting organizer by default.
1 Select Email Whiteboard.
2 Select the whiteboard(s) to email.
3 Click Add to add contacts.
4 Click Send.
Use the Table Console Buttons
To access the convenient features of the table
console, you can use the buttons on the side
toolbar.
Button Description
Power on or off.
Mute the microphone in the local
meeting room.
Adjust the speaker volume to a higher
level.
Adjust the speaker volume to a lower
level.
Select an application. Accesses
custom controls unique to the CX8000
solution.
More information
For more information about setting up and using the
CX8000 solution, refer to the CX8000 Support
on Polycom Support.
Quick Tips
for
Polycom ® CX8000
for Microsoft
www.polycom.com | 3725-68496-001/A | August 2014
©
page Copyright 2014 Polycom, Inc. Polycom
and marks associated with Polycom's products are
trademarks and/or service marks of Polycom, Inc., and are
registered and/or common-law marks in the United States
and various other countries.
® ®
Lync
®
and the names