Advertisement
4. Remove the nut from the stud near the rear corner
of
the trunk.
5. Remove the rear combination lamp assembly. There
is a snap-in connector in the assembly, so you may
have to pull carefully on the inside edge
of the
assembly to remove it.
6.
T u r n
the bulb socket counterclockwise and pull
7. For the tail/stop or turn signal lamps, push the bulb
in, turn it counterclockwise and pull it out. For the
sidemarker bulb, pull it straight out.
it
out.
8. Reverse the steps with
a
new bulb.
6-36
Advertisement
