Advertisement
Disabling the Theft-Deterrent Feature
If
your radio is secured (SEC shows on the display) and
.'
you wish to disable it, enter your security code as follows,
pausing no more than 15 seconds between steps.
'
'
1. Press the 1 and 4 buttons together. Hold them down
until SEC shows on the display. You are now ready
2. Press the SEEK left arrow and hold it until the first
.
to enter your security code.
digit of your code appears.
second digit of your code appears.
digit of your code appears.
~ , .
. '
fourth digit of your code appears.
3. Press the SEEK right arrow and hold it until the
4.
Regs the TUNE left arrow and hold it'until the third
..'
5. Press the TUNE right arrow and hold it until the
6. Press AM-FM after you have checked that the code
you entered matches the one you wrote down and
.
.
0000 should now appear on the display. You will
need to repeat the above procedure.
7. If the code is correct, the radio will now operate.
If
the code is wrong,
ERR
will appear on the .display.
Unlocking the Theft-Deterrent Feature After a
Power Loss
If power is disrupted to the radio while
in
the SEC
mode, the unit will not work and LOC will show on the
display whenever the ignition is on. To unlock the unit,
press the left or riglit SEEK arrows, or the left or right
TUNE arrows and 0000 will appear on the display.
1. Press the SEEK left arrow and hold it until the fist
digit of your code appears.
second digit of your code appears.
digit of your code appears.
fourth digit of your code appears.
matches the one you wrote down. Now the time of
day will appear on the display. (Please note that
if an
incorrect code is entered, ERR will appear on the
display and the above steps need to be repeated.)
2. Press the SEEK right arrow and hold it until the
3. Press the TUNE left arrow and hold it until the third
4. Press the TUNE right arrow and hold it until the
'
.
5. Press AM-FM after you have checked that the code
I
\
3-16
Advertisement
