Advertisement
Setting the Tone
Playing a Cassette Tape
TREB: Turn this knob to the right to hear more treble,
BASS: Turn this control behind the TREB knob to the
right to hear more bass.
Treble and bass cannot be adjusted manually when
TONE SELECT is on.
TONE SELECT Press this button to choose preset
treble and bass equalization settings designed for
ROCK, NEWS, POP, JAZZ and CLASSICAL.
ROCK will appear when you first press TONE
SELECT. Each time you press it, another setting will
appear on the display. If you press it one more time,
after CLASSICAL appears on the display, tone control
will be back to the TREB and BASS knob.
Adjusting the Speakers
FADE: Turn this knob to move
the sound
between the
front and rear speakers.
BAL: Turn this control behind the FADE knob to move
the sound between the right and left speakers.
Your tape player is built to work best with tapes that
are
30 to 45 minutes long on each side. Tapes longer than
that are so thin they may not work well in this player.
The longer side with the tape visible should face to the
right. If you hear nothing or hear just a garbled sound, it
may not be in squarely. Press EJECT to remove the tape
and start over.
Once the tape is playing, use the knobs for VOL, FADE,
TREB, BASS and BAL, just as you do for the radio.
The lighted arrows show which side of the tape
is playing.
MTL: Your bias is set automatically. MTL will appear
on your display when a metal or chrome tape is inserted.
FF: Press this button to advance rapidly to another part
of the tape. Press FF, RCL/PROG or EJECT to return to
playing speed.
REW Press this button to reverse the tape rapidly. Press
REW or RCLPROG to return to playing speed. If you
press RCL/PROG, the tape will also change sides.
3-9
Advertisement
