Download Print this page

Geo Prizm 1996 Owner's Manual page 249

Hide thumbs Also See for Prizm 1996:

Advertisement

Front Sidemarker Lamps
1.
2.
3.
4.
Remove the screw near the top outside
of the
headlamp assembly.
Remove the sidemarker assembly. There is a snap-in
connector in the assembly, so you may have to pry
carefully on the inside edge of the assembly to
remove it.
T u r n
the bulb socket clockwise and then
pull the
bulb straight out.
Reverse the steps with a new bulb.
Front limn Signal Lamps
1. Remove the screw in the parking lamp lens and
remove the parking lamp assembly.
2. Remove the screw from the turn signal assembly.
3. Pull on the rear edge of the assembly and slide the
assembly toward the rear to remove it.
6-33

Advertisement

loading