Content Theft-Deterrent System; Comfort; Onstar; Power Seat Controls - GMC 2007 Yukon Getting To Know Manual

Press and hold the button to activate the
panic alarm. The parking lamps will flash
and the horn will sound for 30 seconds.
Press the button again or turn the igni-
tion to Run to cancel the panic alarm.
See Section 2 of your Owner Manual.

Content Theft-Deterrent System

To arm the content theft-deterrent alarm
system, lock the doors using the RKE
transmitter. The security light on the
instrument panel cluster will flash for
approximately 30 seconds to indicate
the alarm is activated. To disarm the
system, unlock the doors using the RKE
transmitter.
The alarm system will not be armed or
disarmed if the doors are locked or
unlocked with a key, the manual door
lock or the power door lock switch.
See Section 2 of your Owner Manual.

OnStar

(if equipped)
®
The OnStar system provides in-vehicle
safety, security and phone services,
available 24 hours a day, 7 days a
week. These services are easily
accessed using the three OnStar
buttons located on the inside rearview
mirror.
For more information about OnStar
features, refer to the OnStar Owner's
Guide and enclosed audio CD in your
glove box.
See Section 2 of your Owner Manual.

COMFORT

Power Seat Controls

(if equipped)
A
The power seat controls for the driver
and front passenger seats are located
on the outboard side of the seats.
Power Seat: Use the control (A) to
move the seat forward/rearward and
up/down as well as to raise/lower the
front or rear of the seat cushion.
Power Recline (if equipped): Use the
control (B) to recline/raise the seatback.
Power Lumbar (if equipped): Use the
control (C) to increase/decrease lumbar
support and to raise/lower the height of
the support.
See Section 1 of your Owner Manual.
7
C
B