Change The Tone ('Equaliser') Setting; Boost On - Amplicomms PowerTel 710 Voice User Manual

Change the tone ('equaliser') setting

1. Open your menu by pressing
highlight Handset and press
2. Scroll using
3. You'll see the setting.
4. Change the tone setting using
Note: to adjust tone while you're making a call, press the
access the equaliser setting. Then press the
setting as shown on the bar-graph on the handset screen.

Boost on

When this feature is set to On the boost function is always activated. The Boost-
LED on the top left side of the handset is on and the display shows "BOOST IS
ON" .
You can use the
be on again.
If the Boost on-function is set to Off, you will have to switch it on manually by
pressing the
Helpline 0844 800 6503 (See page 60 for costs and hours of operation)
or until you highlight Equaliser and press
key to switch it off for the recent call. For the next call it will
key. For the next call, the boost function will be off again.
, then scroll using
.
or and press
or
U
SING YOUR MENU
or until you
.
.
button to
button to adjust the
35