Showroom Mode - U-Line U-3018RFOL-00 Service Manual

Fan Delay Off =
"Fan Delay Off" is the amount of time in minutes the fan will
continue to run at the end of a cooling cycle.
To access Fan Delay
1. Use Down to select "Fan Delay".
2. Press Select .
To alter fan settings.
3. Use Down to select either "Fan Delay On" or "Fan Delay
Off" and press Select . The chosen option will begin to flash.
4. Press Up or Down
5. Press Select to confirm.
To exit Fan Delay use Up
Select to confirm.
USB Port
Up
Down
The USB Port menu option allows the selection of a communication
mode. The 3000 Series can communicate either via TTY to a PC or
log diagnostic information directly to a USB flash disk.
ID Communication
PC Link PC TTY
Flash USB Flash Drive
To access USB Port
1. Use Down to select "USB Port".
2. Press Select .
To alter communication settings.
3. Use Down to select the current setting and press Select
4. Press Up or Down
5. Press Select to confirm.
To exit "USB Port" use Up
Select to confirm.
to change settings.
to select "Return to Menu" and press
RETURN TO MENU
USB PORT
PC Link
to change settings.
to select "Return to Menu" and press

Showroom Mode

Showroom displays a number of features and allows the unit to be
powered on without running the cooling system.
To toggle showroom mode
1. Use Down
2. Press Select
3. Use Down
begin to flash.
4. Press Up
Select
5. Press Select
If set to "on" showroom mode will begin immediately. To exit
showroom mode press and release Power
To exit the showroom mode menu use Up
Menu" and press Select
.
U-Line Service
General Information
Up
RETURN TO MENU
SHOWROOM MODE
OFF
Down
to select "Showroom Mode".
.
to select "Off" and press Select
or Down to toggle between off and on.
to confirm.
.
to confirm.
Select
. "Off" will
to select "Return to
15