Route - Geonav 3 User And Installation Manual

Route

55
ROUTE
EDITING A ROUTE (CURSOR MODE)
Creating a waypoint
Using the joystick, move the cursor on the position desired
and press ENTER to insert a waypoint.
To enter further waypoints, move the cursor and press ENTER.
The new waypoint will be appended to the existing route.
Up to 20 waypoints per route can be entered by using the
GOTO function as well (see the Route to a waypoint Section).
Deleting a waypoint
Use the joystick to position the cursor on the waypoint to
delete, select DELETE WP from the menu, then press ENTER.
Deleting all waypoints in a route
Use the joystick to position the cursor on a waypoint or route
segment, select DELETE ROUTE from the menu, then press
ENTER.
Moving a waypoint
Position the cursor exactly on the waypoint to be moved; press
ENTER to capture the waypoint, then move the waypoint to the
position desired and confirm the operation by pressing ENTER.
Inserting a new waypoint in a route
Position the cursor exactly on the route leg to edit and press
ENTER to capture the leg.
Once captured, the leg will show a thicker line to distinguish
it more easily from the other route legs. A window will also
show the leg captured. Move the manual cursor to the posi-
tion desired, insert the new waypoint and confirm by press-
ing ENTER.
EDITING A ROUTE (NAVIGATION MODE)
If the manual cursor is displayed, press the PAGE/EXIT key to
enter Navigation mode.
English