Table of Contents
Advertisement
5. OS Driver Installation
3.
Highlight Disk and CD-ROM Drivers (e.g., IDEATA). Press Enter and load
an additional driver. Then press the INS key. The system always defaults to
the A: path. Highlight the HAM driver and press Enter. Select Yes to save
and move the driver into the operating system. Press Enter, the system will
start to copy the files.
4.
Load a separate instance of the driver for every Adaptec SCSI controller
channel or host adapter present in the system. Load the Adaptec SCSI driver
twice with different slot number from STARTUP.NCF file as follows:
load ADPT160M.HAM Slot=10012
load ADPT160M.HAM Slot=10013
5.
When prompted for a slot number, accept the slot numbers displayed. Make
sure to write these slot numbers down for future reference.
6.
When asked to edit the STARTUP.NCF file, make sure that the
ADPT160M.HAM is loaded once for each Adaptec controller SCSI channel
present in the system. Add the statement SLOT=<slot number> to each load
line in the STARTUP.NCF, by specifying the slot numbers written down in
step 5 above, with only one slot number per load instance.
®
II.
Intel
82550 Network Driver Installation
A. Preparing Intel 82550 LAN Driver Diskette
1.
Use the self-extracting image files.
For the Intel(R) PRO/100 Server Adapter driver, the executable file is located
here:
\Drivers\Lan\makedisk\makenw.bat
2.
Use the manual to create driver diskette.
If you need to use a floppy disk to install the on-board Intel 82550 network
adapter drivers, use the MAKEDISK.BAT utility located in the
\Drivers\LAN\MAKEDISK directory on ASUS Driver Support CD.
MAKEDISK [operating system] [destination]
80
ASUS TRL-DLS User's Manual
Advertisement
Chapters
Table of Contents
