Microsoft Windows Xp Professional; Novell ® Netware ® Server; Adaptec ® Scsi Driver Installation; Preparing An Adaptec Driver Disk - Asus Dual TualatinTM Motherboard TRL-DLS User Manual

5. OS Driver Installation
5.3 Microsoft
Windows XP contains default driver to support Intel 82550 chipset, ATI Rage XL
chipset, and Adaptec AIC7899W SCSI chipset.
NOTE: For Windows XP Professional users, we recommended that you
use the Intel 82550 driver from the TRL-DLS support CD.
®
5.4 Novell
®
I. Adaptec
A single driver (*HAM) is provided for the Novell NetWare 4.XX, and 5.X
environments. This document explains how to install and use Adaptec SCSI Host
Adapter Module (HAM) driver for NetWare. The Adaptec solution that consists of
the device drivers ADPT160M.DDI and ADPT160M are Host Adapter Modules
(HAMs). HAM. To support SCSI devices, load the HAM in conjunction with a
SCSI Custom Device Module (CDM). Novell has developed generic CDMs to support
SCSI-2 hard drives, SCSI CD-ROM devices, SCSI Magneto Optical devices, SCSI
tape devices, and SCSI changer devices. In addition, third party vendors are
developing CDMs to support their specific devices.
Novell Netware does not include the drivers for the Adaptec SCSI controller. You
must create a driver disk prior to Novell Netware installation.
NOTE: Prepare one blank formatted high density floppy disk. Label the
disk "Ultra160 FMS v1.11 for Novell Netware version 3.1x/4.xx
Setup Disk" or "Ultra160 FMS v1.11 for Novell Netware version 5.xx
Setup Disk".
A. Preparing an Adaptec Driver Disk
1. Insert the ASUS TRL-DLS support CD into your CD-ROM drive.
2. Run the Adaptec Disk Creation Utility from the following path:
\Drivers\Adaptec\fmsutil.exe
ASUS TRL-DLS User's Manual
®
Windows
®
NetWare Server
SCSI Driver Installation
®
XP Professional
77