Asus Dual TualatinTM Motherboard TRL-DLS User Manual page 74

5. OS Driver Installation
11. In some cases, a message will state that this driver is not digitally signed.
This message informs the user that a non-signed driver is being installed.
Either click No to cancel the installation if the non-signed driver is not
desired or click Yes to continue the installation.
NOTE: Drivers are digitally signed by the Microsoft Windows
Hardware Quality Lab (WHQL). Due to the delay between the general
customer release by Adaptec Logic of Windows drivers and the
completion of WHQL testing, some drivers that are distributed with
adapters or downloaded from the Adaptec Logic web site at
www.adaptec.com may not be digitally signed.
12. The system will load the driver from the Adaptec driver diskette. A message
box may appear indicating that the target (existing) driver is newer than the
source (upgrade) driver. Click No to cancel the driver upgrade at this point
or click Yes to continue the installation.
74
ASUS TRL-DLS User's Manual