Asus Dual TualatinTM Motherboard TRL-DLS User Manual page 26

3. HARDWARE SETUP
4) Wake-On-Ring Connector (2-pin WOR)
This connector connects to internal modem cards with a Wake-On-Ring output.
The connector powers up the system when a ringup packet or signal is received
through the internal modem card. NOTE: For external modems, Wake-On-Ring
is detected through the COM port.
®
TRL-DLS
TRL-DLS Wake-On-Ring Connector
5) Chassis Intrusion Connector (CHASSIS)
This connector is designed for chassis intrusion detection. This requires an
external detection mechanism such as a chassis intrusion sensor or microswitch.
When any chassis component is removed, the sensor triggers and sends a high-
level signal to this connector to record a chassis intrusion event.
®
TRL-DLS
TRL-DLS Chassis Intrusion Lead
26 ASUS TRL-DLS User's Manual
WOR
1 2
Ground Ring#
CHASSIS