Sony CDX-GT710UV Operating Instructions Manual page 25

BLACK OUT
Turns off the illumination automatically
for any source (e.g., during radio
reception/CD playback, etc.) if no
operation is performed for 5 seconds:
"ON," "OFF."
To bring the light back on, press any
button on the unit. (When activated,
remote operation is unavailable.)
DEMO (Demonstration)
Activates the demonstration: "ON,"
"OFF."
DIMMER
Changes the display brightness.
– "AT": to dim the display automatically
when you turn lights on. (Available only
when the illumination control lead is
connected.)
– "ON": to dim the display.
– "OFF": deactivate the dimmer.
CONTRAST
Adjusts the contrast of the display. The
contrast level is adjustable in 7 steps.
COLOR (Preset Color)
Selects the preset color of the display and
buttons on the main unit (page 19).
CUSTOM COLR (Custom Color)
Selects a preset color as a basis for
further customizing (page 20).
SENSME COLR (SensMe™ Color)
Changes the color according to the
SensMe™ channels: "ON," "OFF."
SOUND SYNC
Selects the color with sound
synchronization: "ON," "OFF."
WHITE MENU
Sets the effect when the source is
switched: "ON," "OFF."
START WHITE
Sets the start up color: "ON," "OFF."
MOTION DSPL (Motion Display)
– "SA": to show moving patterns and
spectrum analyzer.
– "ON": to show moving patterns.
– "OFF": to deactivate the Motion Display.
AUTO SCROLL
Scrolls long items automatically: "ON,"
"OFF."
ZAPPIN TIME
Selects the playback time for the
ZAPPIN function.
– "ZAP.TIME-1 (about 6 seconds),"
"ZAP.TIME-2 (about 15 seconds),"
"ZAP.TIME-3 (about 30 seconds)."
ZAPPIN BEEP
Has the beep sound between track
passages: "ON," "OFF."
LPF FREQ (Low Pass Filter Frequency)
Selects the subwoofer cut-off frequency:
"50Hz," "60Hz," "80Hz," "100Hz,"
"120Hz."
LPF SLOPE (Low Pass Filter Slope)
Selects the LPF slope: "1," "2," "3."
SUBW PHASE (Subwoofer Phase)
Selects the subwoofer phase: "NORM,"
"REV."
HPF FREQ (High Pass Filter Frequency)
Selects the front/rear speaker cut-off
frequency: "OFF," "50Hz," "60Hz,"
"80Hz," "100Hz," "120Hz."
HPF SLOPE (High Pass Filter Slope)
Selects the HPF slope (effective only
when HPF FREQ is set to other than
"OFF"): "1," "2," "3."
25