Sony CDX-GT710UV Operating Instructions Manual page 23

The equalizer curve is stored in
"CUSTOM."
Optimizing sound by Time
Alignment — Listening
Position
The unit can simulate a natural sound field
by delaying the sound output from each
speaker to suit your position.
The options for "POSITION" are indicated
below.
FRONT L (): Front left
FRONT R (): Front right
FRONT (): Center front
ALL (): In the center of
your car
OFF: No position set
You can also set the approximate subwoofer
position from your listening position if:
– the subwoofer is connected
– the listening position is set to "FRONT L,"
"FRONT R," "FRONT" or "ALL."
The options for "SW POSITION" are
indicated below.
NEAR (): Near
NORMAL (): Normal
FAR (): Far
1
During reception/playback, press the
select button.
2
Rotate the control dial until
"POSITION" appears, then press it.
3
Rotate the control dial to select from
"FRONT L," "FRONT R," "FRONT" or
"ALL," then press it.
4
Rotate the control dial until "SW
POSITION" appears, then press it.
5
Rotate the control dial to select the
subwoofer position from "NEAR,"
"NORMAL" or "FAR," then press it.
6
Press (BACK).
To cancel listening position, select "OFF"
on step 3.
Adjusting the listening
position
You can fine-tune the listening position
setting.
1
During reception/playback, press the
select button.
2
Rotate the control dial until "ADJUST
POS" appears, then press it.
3
Rotate the control dial to adjust the
listening position, then press it.
Adjustable range: "+3" – "CENTER" –
"–3."
4
Press (BACK).
DM+ Advanced
DM+ Advanced improves digitally
compressed sound by restoring high
frequencies lost in the compression process.
1
During playback, press the select
button.
2
Rotate the control dial until "DM+"
appears, then press it.
3
Rotate the control dial to select "ON,"
then press it.
4
Press (BACK).
Tip
The DM+ setting can be memorized for each
source.
23