Mounting The Magnetic Grill - Totem KIN Architectural series User Manual

MOUNTING THE MAGNETIC GRILL

This high performance fully back boxed design incorporates a magnetic grill attachment. Once fully
installed, the grill will align flush with the aluminum bezel.
painting the grill
The grill incorporates a scrim-cloth to hide the drivers when installed. This scrim-cloth must be removed
before paint¬ing. It is adhered to the grill with a light adhesive. To remove, gently peel from each corner
in turn.
SAVE the scrim-cloth until the grill is painted and dry.
It is not necessary to paint the speaker cabinet or frame, as the grill will cover the entire face.
If you are using a spray gun, set it for the most diffuse spray and try two very thin coats. If you are using a
brush, thin the paint so that the grill holes will not be blocked.
After the paint is dry, re-apply the scrim-cloth. Starting with one edge, work the scrim-cloth back into
place, making sure that the cloth is stretched flat behind the grill.
SPEAKER POSITIONING
Totem produces speakers with great dispersion, both on the vertical and horizontal axis. These speakers
are of a superior design and will perform remarkably well in a variety of spaces. With special care and the
time you take to position your Totem speakers the greater the result.
totemacoustic.com
10