Totem KIN Architectural series User Manual page 11

CONNECTIONS
All connections should be made with the equipment turned off.
Totem delivers all speakers with jumpers installed. For a standard single wire connection simply leave the
jumpers in place. Be certain to connect the positive red (+) terminal of the speaker to the positive red (+)
output terminal on the amplifier. Be certain to connect the negative black (-) terminal of the speaker to
the negative black (-) output terminal on the amplifier. The speakers will sound out of phase (bass loss and
image distortion) if there is an error in your connection. Totem speakers can be bi-amped and bi-wired,
please consult your amplifier manual for detailed instructions or contact your Totem Authorized Dealer.
Caution: For a bi-amp connection jumpers MUST be removed.
Single wire
totemacoustic.com
Bi-wire
Remove jumpers
11