Installing Kin In-Ceiling - Totem KIN Architectural series User Manual

installing kin angled in
1- Gold Plated speaker terminals
Accepts bare wire up to 12 gauge.
2- Heavy duty PVC dog legs
Helps you to secure the in-wall sub to the sheetrock.
3- Anti-resonant absorption pads
Helps the grill assembly not vibrate.
4- Neodymium magnets with anti-resonant absorption pads Helps the grill to easily attach into place. Use
caution, these magnets are powerful.
To secure the Totem in-wall speaker into place incorporate the dog legs. To incorporate the dog legs turn
the screw ½ turn counter clockwise in order to deploy the dog legs, then you can start to tighten the dog
legs screw (clockwise). Repeat for the remaining dog legs screws.
totemacoustic.com
-
ceiling
Figure 2: Speaker enclosure
8