Wall Mounting - Totem KIN Solo Manual

The KIN Solo can conveniently be wall mounted horizontally or vertically with the supplied bracket and
hardware. The flat surface of the bracket faces the wall, and the bolt protrusions face the speaker.
1. Affix the four rubber feet to the back corners of the speakers.
2. Orient the bracket in the desired position.
3. Ensure the bracket is level. If speaker cables were passed through the wall, they should exit
from the central bracket opening.
4. Attach the bracket to the wall; use the wood screws if you are attaching to a stud, or the wall
anchors and associated screws if attaching to drywall.
5. Align the protruding bolts of the bracket with the circular keyway opening of the integrated
bracket behind the speaker. Push the speaker horizontally onto the bracket to insert the bolt
into the speaker bracket opening, then slide the speaker downwards to lock it into place. A
small amount of pressure needs to be applied on the downward motion to affix the bracket
securely and snugly.
REMEMBER TO HAVE THE TWEETERS CORRECTLY POSITIONED TO MAXIMIZE DISPERSION
All connections should be made with the equipment turned off.
Be certain to connect the positive red (+) terminal of the speaker to the
positive red (+) output terminal on the amplifier. Be certain to connect the
negative black (-) terminal of the speaker to the negative black (-) output
terminal on the amplifier. The speakers will sound out of phase (bass loss
and image distortion) if there is an error in your connection.
totemacoustic.com

WALL MOUNTING

CONNECTIONS