Multi-Function Meter Unit - Yamaha 2015 YZF-R3A Owner's Manual

tailed explanation of this indicator light
and on how to set it.)
The electrical circuit of the indicator
light can be checked by turning the key
to " ". The indicator light should
come on for a few seconds, and then
go off.
If the indicator light does not come on
initially when the key is turned to " ",
or if the indicator light remains on, have
a Yamaha dealer check the electrical
circuit.
INSTRUMENT AND CONTROL FUNCTIONS

Multi-function meter unit

1. "SEL" button
2. "RES" button
3. Tachometer
4. Fuel meter
5. Shift timing indicator light
6. Clock
7. Transmission gear display
8. Speedometer
9. Multi-function display
10.Coolant temperature meter
WARNING
Be sure to stop the vehicle before
making any setting changes to the
multi-function meter unit. Changing
3-4
EAUN0870 settings while riding can distract the
operator and increase the risk of an
accident.
The multi-function
equipped with the following:
 a speedometer
 a tachometer
MPH
km/h
 a clock
km/L
L/100km
mileMPG
 a fuel meter
 a coolant temperature meter
 a transmission gear display
 a multi-function display
 a shift timing indicator light
 a self-diagnosis device
TIP
 Be sure to turn the key to "
fore using the "SEL" and "RES"
buttons, except for setting the
shift timing indicator light control
mode.
EWA12423
 For the UK only: To switch the
speedometer and multi-function
displays between kilometers and
miles, press the "SEL" button for
at least one second.
meter unit is
3
" be-