Replacing A Turn Signal Light; Bulb; Replacing The License Plate Light Bulb - Yamaha 2015 YZF-R3A Owner's Manual

Replacing a turn signal light

bulb

1. Remove the turn signal light lens
by removing the screw.
2
1. Turn signal light lens
2. Screw
2. Remove the turn signal light bulb
socket (together with the bulb) by
turning it counterclockwise.
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU62590
1
1. Turn signal light bulb socket
3. Remove the burnt-out bulb by
pulling it out.
4. Insert a new bulb into the socket.
5. Install the socket (together with
the bulb) by turning it clockwise.
6. Install the turn signal light lens by
installing the screw. NOTICE: Do
not overtighten the screw, oth-
erwise the lens may break.
[ECA11192]
Replacing the license plate
light bulb
1
1. Mudguard
2. Quick fastener
6-34
1. Remove the mudguard by remov-
ing the quick fasteners.
2. Remove the rear fender lower
panel by removing the bolts and
screws.
EAU62670
1
2
6