Basic Rf Installation; Beginning Setup - ZeeVee ZvPro820i Configuration Manual

Basic RF Installation

RF Output
+25 dBm
V
Factory default settings allow ZvPro 800i modulators
to broadcast up to two unencrypted HDMI sources on
We recommend using the most updated version of
1. Apply power.
2. Connect an HDMI video source to the HDMI input port of
the ZvPro 800i, using an HDMI cable (which is available
3. – Connect the Analog Audio if the digital audio is
not present on HDMI or to implement the delay matched
audio feature.
Unencrypted Composite
HDMI Out Video
Coax cable connects
to coax network
Analog
Audio
Unencrypted HDMI
Video Source
Video Source
Back of Zvp820i Modulator
Optional Delay
Matched Analog
Audio Output to
audio system
1. Connect the Coaxial Output of the ZvPro to your RF network.
2.
3.
default channel lineup information, refer to the Default
Channel Lineup table.
4
the menu system of your
ZvP r o 800i Conf igurat ion Guide
Ethernet to network or
directly to computer
AV Input RF
#
AV Input 1 2
AV Input 2 3
Channel
2.1
3.1
|
P a g e 5