Running Initial Setup - Sony Bravia KDL-40R38OB Operating Instructions Manual

3 Anchor the TV to the wall by using bolts, wall
anchor and chain (or rope).
iii ....................... Wa,,-mount
PP " 'l
_! Wall-anchor
(not supplied)
L____J
Note
• YourTVis shipped with screws attached to the rear of the
TV depending on the TV model. (They are fastened in the
screw holes for wall mounting.) Be sure to remove the
upper two screws prior to anchoring the TV to a wall.
• Securing the TVto the stand without securing the TVand
the stand to the wall provides minimum protection
against the TV toppling over. For further protection, be
sure to follow the three measures recommended.
Running Initial Setup
2
f
Complete your cable connections before
proceeding with the Initial Setup. Refer to
the Quick Setup Guide (supplied) for
sample connection diagrams.
Note
• When the TV is in standby mode (the LEDindicator
does not light up), press POWER on the remote
control to turn on the TV.
Press _/_/<_/_> to select an item, then
press D.
Follow the instructions on the screen.
Note
• You can also tune channels manually,
• Select Home from Location for the best TV settings
to use the TV in the home.
11us