Running Initial Setup - Sony BRAVIA KDL-60R510A Operating Instructions Manual

Running Initial Setup

Complete your cable connections before beginning the Initial Setup. Refer to the Quick
Setup Guide (supplied) for sample connection diagrams.
2
Use the remote control buttons described below to navigate through the Initial
Setup.
V/v/B/b buttons:
Allow you to navigate and highlight options where applicable.
Allows you to select the highlighted option and advance to the next screen.
3
Auto Program will scan for available channels from the signal source directly
connected to the TV's CABLE/ANTENNA input. Follow the help text provided on the
screen to run the Auto Program.
• If you cancel the Auto Program, any channels you have
selected are not registered. To rescan for available
channels, run Auto Program.
• Connect either your cable or antenna to the TV (you can
connect both using an A-B RF switch (not supplied)); for
more details see page 10.
4
Set the current date and time.
1
button:
Turn on the TV.
The Initial Setup screen will appear.
17