Lifting The Boiler Off The Pallet; Transporting The Boiler On Rollers - Buderus Logano plus GB402 Installation And Maintenance Instructions Manual

4.1.1

Lifting the boiler off the pallet

B Remove 4 safety screws [1].
Fig. 5 Separating the boiler from the pallet
1 Safety screws
2 Fixing bar
NOTICE: Boiler damage through impact.
The boiler is at risk of tipping over if it is
pushed off the side of the pallet.
B Push the boiler off the pallet towards the
burner or flue gas side. When pushing the
boiler from the flue gas side, remove fixing
bar [2].
B Prevent the boiler from coming down hard.
Logano plus GB402 - Subject to technical modifications!
Transporting the boiler
4.2

Transporting the boiler on rollers

If the path to the boiler room is level, the boiler can also be
rolled. For this, use at least 5 pipes of approx. 900 mm
length (R 1¼ " diameter) as rolling supports.
B Position the pipes approx. 400 mm apart on the floor.
B Lift the boiler onto the pipe sections and carefully
transport it to the installation room.
Commercially available transport rollers can
be used.
B Ensure even load distribution on the load-
bearing parts to prevent distortion of the
bottom plate.
Fig. 6 Transporting the boiler on rollers
(measurements in mm)
Protect boiler from contamination if the boiler
is not to be taken into use immediately.
Dispose of packaging in an environmentally
responsible manner.
4
15