Cuisinart CMW-100C Instruction Booklet page 10

10. Cooking End Signal
When the cooking is over, the buzzer
will sound 5 beeps to signal that the
cooking is finished.
11. Multi-section Cooking
The microwave can be programmed
to cook on 2 different power levels for
the duration of a cooking cycle. For
example, if you want to cook with
80% microwave power for 5 minutes
and then 60% microwave power for
10 minutes, follow these steps:
1. To select 80% microwave power,
press POWER repeatedly until
PL8 is displayed.
2. Press the number buttons "5",
"0", "0" to set the cooking time.
3. To select 60% microwave power,
press POWER repeatedly until
PL6 is displayed.
4. Press number buttons "1", "0",
"0", "0" to set the cooking time.
5. Press START/+30 SEC to start
cooking.
12. Pre-Set Function
The microwave can be programmed
to start in advance. For example, if
the time of day is 7pm the microwave
can be set to start cooking at 9pm.
First select either the power level and
time or auto menu options of your
choice (see page 8 and 11 for instruc-
tions). Follow steps below to set the
Pre-Set function:
1. Press CLOCK/PRE-SET and enter
the time of day to begin program
cooking (for example, 9.00).
2. Press the start button.
3. The clock icon on the LED dis-
play will flash until the unit oper-
ates at the pre-set time.
To cancel the Pre-Set function,
press STOP.
13. Inquiring Function
During use the microwave CLOCK/
PRE-SET, POWER, and AM/PM
buttons can be pressed to inquire
current status or setting.
1. AM/PM button: In the clock set-
ting the AM/PM button can be
pressed to display either A or P
time setting.
10
2. CLOCK/PRE-SET button: During
cooking operation when the
CLOCK/PRE-SET button is
pressed the LED will display the
clock for three seconds and the
AM/PM for another three sec-
onds.
3. In pre-set state, the LED will dis-
play the clock and the seconds
will be flashing at the same time.
Press AM/PM and either A or P
will be displayed for 3 seconds.
Then press CLOCK/PRE-SET to
inquire the pre-set time. The pre-
set time will be flashing for three
seconds, the AM/PM will be dis-
played for another three seconds.
The oven will then turn back to
the clock state setting.
4. During cooking when the POWER
button is pressed, the current
microwave power will be dis-
played on LED for three seconds.
After which the oven will return to
previous state.
14. OTHER SPECIFICATIONS
a. In standby state, if the set clock
digital tube displays current time,
the icon " : " would flash; other-
wise, it shows "0:00".
b. In setting function state, LED
displays corresponding setting.
c. In working or pause state, LED
displays remainder cooking time.