Table of Contents
Advertisement
2.8
Connecting the cables
2.8.1 Motherboard connections
The chassis includes power and signal cables that you need to connect to
the motherboard, SCSI backplane, and to the devices that you will install.
Most of the cables for the chassis kit are already connected upon
shipment. When installing system devices and connecting cables,
make sure that all cables are routed properly for better system stability
and performance. Refer to the picture below when arranging cables.
1
Standard cables connected to the motherboard
1.
Chassis fan
2.
12V AUX power
3.
24-pin ATX power
4.
Primary IDE
5.
Secondary IDE
6.
SCSI backplane
Refer to the motheboard user guide for detailed information on the
connectors.
2-24
2
3
7
9
8
4
6
5
11
10 12
7.
SMBus panel to backplane
8.
Floppy disk drive
9.
System front panel
10. External SCSI
11. HDD access
12. Front USB
Chapter 2: Hardware setup
Advertisement
Table of Contents
