FUNCTION SEARCH STATUS PHONES CH1/MIC MARKER STOP PAUSE PLAY MAX MIN MAX MIN ENTER SHIFT RETURN MODE LOCK Before operating this product, please read the instructions carefully and save this manual for future use. ENGLISH Downloaded From Disc-Player.com Panasonic Manuals...
If this should be the case, deal with the situation by, for instance, moving the source of the magnetic fields away from the unit before operation. Downloaded From Disc-Player.com Panasonic Manuals – 2 –...
Page 3
Leakage current of this unit may be exceeded the allowable value when conductively connected to other equipment. To avoid increment of the leakage current, separation device shall be applied. is the safety information. For your safety (USA and Canada) Downloaded From Disc-Player.com Panasonic Manuals – 3 –...
For your safety (when using the LQ-MD800P in Europe) The LQ-MD800P is equipped with the North American type mains cable only. When using this product in Europe, you must use a 3-core grounding type of mains cable that complies with the appropriate national standard.
Page 5
If in any doubt please consult a qualified electrician. WARNING: THIS APPLIANCE MUST BE EARTHED. IMPORTANT: The wires in this mains lead are coloured Fuse in accordance with the following code: Green-and-Yellow: Earth Blue: Neutral Brown: Live Downloaded From Disc-Player.com Panasonic Manuals – 5 –...
• Using the MENU window .........22 Regarding copyright ........42 DISC INFORMATION ........23 Specifications ..........43 • Enter Title ............23 • Disc Protection/Releasing disc protection ..23 • Erase all programs...........23 • Format .............24 • Finalize – Creating DVD-Video......24 Downloaded From Disc-Player.com Panasonic Manuals – 6 –...
Standard accessories • 4.7 GB, single-sided, non-cartridge: LM-AF120U (For USA and Canada) LM-AF120E (For Europe) Power cord x 1 For USA, Canada (LQ-MD800P) x 2 For Europe (LQ-MD800E) DVD-R discs • 4.7 GB, single-sided, non-cartridge: Emergency ejection pin x 1...
When it is set to ON, none of the front panel switch can be operated. Shift buttons (SHIFT) Display Press together with other buttons to use blue-labeled functions. Shows various information (see page 9). Downloaded From Disc-Player.com Panasonic Manuals – 8 –...
Each lamp goes off one after another • Title, Chapter, Group according to the decrease of the disc remaining amount. • Miscellaneous messages This is not an exact indication of the disc remaining etc. amount. Downloaded From Disc-Player.com Panasonic Manuals – 9 –...
RS-232C terminal. Connect a computer or other control device to enable external control. Power socket USB Remote connector (Type-B connector) Connect power cord (supplied). USB terminal. Connect a computer or other control device to enable external control. Downloaded From Disc-Player.com Panasonic Manuals – 10 –...
Discs We recommend using discs manufactured by Panasonic as they have been tested to be compatible with this unit. In case of discs manufactured by other makers, play may be impossible in some cases due to the condition of the recording.
(6) Use [ ] to select “Progressive (NTSC)” and AUDIO AUDIO S-VIDEO press [ENTER]. (7) Use [ ] to select “On” and press [ENTER]. To return to the previous screen Downloaded From Disc-Player.com Panasonic Manuals Press [RETURN]. – 12 –...
Page 13
(Video will not be displayed correctly if connected to an VIDEO incompatible monitor television.) AUDIO IN • All Panasonic monitor televisions that have 480P input terminals are compatible. Consult the manufacturer if you have another brand of monitor television. S-Video, stereo audio terminals...
Page 14
• “Connection”–“Norm (4:3) TV Settings (DVD)” or “Norm (4:3) TV Settings (DVD-RAM)”. • The video setting on the disc. How video appears is often specified by the disc itself. • The video settings on your monitor television. Downloaded From Disc-Player.com Panasonic Manuals – 14 –...
] to select the item you want to (6) Use [ ] to select the input and press [ENTER]. change. • Select “V(VIDEO)”, “SV(S-VIDEO)”, or “DV”. • For LQ-MD800P (USA and Canada), the items change as follows: Notes: Hour Minute Second...
When using discs recorded with a DVD video recorder for a different (e.g., : “0:50 XP” indicates 50 minutes in XP mode) Downloaded From Disc-Player.com Panasonic Manuals destination, do not perform all operations except play. – 16 –...
• After skipping, the unit returns to the previous state, play or pause. • Press [PLAY ] to restart play if it was paused. • During play, only pressing [ ] or [ ] allows skip. Downloaded From Disc-Player.com Panasonic Manuals – 17 –...
• Some subtitles recorded around the marker may fail to appear. Using FUNCTION menus to mark positions Displaying the marker icon (1) While played or paused, press [FUNCTION (SHIFT + STATUS)]. Downloaded From Disc-Player.com Panasonic Manuals – 18 –...
MIX, CH1, CH2: To select the mode, use the FUNCTION menus. Sound mode CH1 CH2, CH1, CH2: To select the mode, use the FUNCTION menus. When “CH1 CH2” is selected, Downloaded From Disc-Player.com Panasonic Manuals display is blanked. – 19 –...
Angle that you cannot select or change. Change the number to select an angle. For your reference: • You cannot change the audio, subtitles, or angles on DVD-Video created on this unit. Downloaded From Disc-Player.com Panasonic Manuals – 20 –...
Auto1: For film material Auto2: For video material (the same as Auto1, but able to convert 30 frames per second progressive video) Video: For video material Downloaded From Disc-Player.com Panasonic Manuals – 21 –...
TOP MENU / MENU Display disc’s menus: (Example) Note: • Some items will not be shown unless you release disc protection with DISC INFORMATION—“Disc Protection” or release cartridge protection with the write protect tab. Downloaded From Disc-Player.com Panasonic Manuals – 22 –...
• If protection is active on even one program, you cannot erase all programs. For your reference: • You cannot erase computer data. Downloaded From Disc-Player.com Panasonic Manuals • Nothing will be erased if the disc is write-protected. – 23 –...
“Contents on the disc have been protected. Start formatting the disc?” appears in step (5). Select “Start” if you want to format the disc. The contents will be erased even if they have been protected. Downloaded From Disc-Player.com Panasonic Manuals – 24 –...
• The contents of the list are recorded on the disc. • When the disc is protected, you can only access “Properties”. Release the protection to access other items. Downloaded From Disc-Player.com Panasonic Manuals – 25 –...
• You can give DVD-R titles of up to 44 characters. • The full title is shown in the “Properties” screen, but if you enter a long title, only part of it is shown in the program list. Downloaded From Disc-Player.com Panasonic Manuals – 26 –...
• You may not be able to specify start and end points within 3 seconds of each other. • You cannot use the [STOP ] button while finding the division point. • You cannot specify start and end points if the picture recorded is stilled. Downloaded From Disc-Player.com Panasonic Manuals – 27 –...
• You can also display the “CREATE PLAY LIST” screen by For your reference: selecting “– –” at the bottom of the play list. • The time of the scene is displayed in the selected scene. Downloaded From Disc-Player.com Panasonic Manuals – 28 –...
] after step (8) to select “Next” and press [ENTER]. (2) Repeat steps (7) and (8). For your reference: • You can fast-forward, rewind, pause and slow-motion while playing scenes just as you can during normal play. Downloaded From Disc-Player.com Panasonic Manuals – 29 –...
Select “No” in step (7) and press [ENTER] or [RETURN]. slow-motion to find the start point of the scene For your reference: and press [ENTER]. • The play list itself is erased if you erase all the scenes in it. Downloaded From Disc-Player.com Panasonic Manuals – 30 –...
] to select the desired play list and press [ (4) Use [ ] to select “Properties” and press [ENTER]. • The play list is erased. To stop partway Select “No” in step (5) and press [ENTER] or [RETURN]. Downloaded From Disc-Player.com Panasonic Manuals – 31 –...
] to select “SET” and and play list screen. pressing [ENTER].) • The title is entered and the screen disappears. To stop partway through Press [RETURN]. (does not save any title information.) Downloaded From Disc-Player.com Panasonic Manuals – 32 –...
VTR2: Protocol with high compatibility with equipment manufactured by other companies. For your reference: • The operation of this unit may depend on the selected protocol. Downloaded From Disc-Player.com Panasonic Manuals – 33 –...
Page 34
Audio input through AUDIO IN CH1 (A) and AUDIO IN When connected to a monitor television through the CH2 (B) is mixed and recorded. COMPONENT VIDEO OUT (Y/P ) terminals. [Lighter] [Normal] [Darker] Downloaded From Disc-Player.com Panasonic Manuals (Continued on next page) – 34 –...
Page 35
Changing the unit’s settings (continued) Note: TV System [PAL] [NTSC] ( for LQ-MD800P ) • Microphone signal is always recorded to channel 1 when a [PAL] [NTSC] ( for LQ-MD800E ) microphone is connected. PAL: System Select when connecting to a PAL or Multi-system monitor television.
Do not place or store discs in the following places • Locations exposed to direct sunlight. • Humid or dusty locations. • Locations directly exposed to a heat vent or heating appliance. Downloaded From Disc-Player.com Panasonic Manuals – 36 –...
LPCM sound is available when recording in XP or SP mode. GMT (Greenwich Mean Time) WAT (West Africa Time) (Atlantic Standard Time) (Eastern Standard Time) (Central Standard Time) (Mountain Standard Time) (Pacific Standard Time) (Alaska Standard Time) (Hawaii Standard Time) Downloaded From Disc-Player.com Panasonic Manuals – 37 –...
This play list cannot be edited. Character set of the disc is different. Cannot finalize. No folder. • There is no compatible folder in this unit. • The operation is prohibited by the disc or unit. Downloaded From Disc-Player.com Panasonic Manuals – 38 –...
Page 39
Alarms When “Beep” is set to “On”, the alarm sounds if a problem occurs (for example, recording is impossible for some reason). Note: • The alarm may not sound under some circumstances. Downloaded From Disc-Player.com Panasonic Manuals – 39 –...
• Do not enter titles onto a disc that was recorded in another region as this can cause titles on the disc not to appear. Downloaded From Disc-Player.com Panasonic Manuals – 40 –...
Page 41
→We cannot offer any guarantee regarding lost programs or discs. You will have to format the disc or use a new disc. Downloaded From Disc-Player.com Panasonic Manuals – 41 –...
Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. Downloaded From Disc-Player.com Panasonic Manuals – 42 –...