Baby Alert - LeapFrog Advanced Baby Monitor Instruction Manual

7. 'Minute' is displayed. Use the
'Up/Down' keys to scroll to the
correct minute. Press the 'OK' key.
You will hear a confi rmation 'beep'
and 'Saved' will be briefl y displayed.
The time and date will now be
displayed on the parent unit.
To set 12 or 24 hour clock:
1. Press the 'Menu' key and then
use the 'Up/Down' keys to scroll
to 'Clock'. Press the 'OK' key.
2. Use the 'Up/Down' keys to
scroll to 'Hour Format'. Press
the 'OK' key.
3. '12Hrs?' will be displayed when
24 hour clock is already set. Press
the 'OK' key to change to 12
hour clock or the 'Menu' key to
exit without changing the setting.
If 12 hour clock is set, '24Hrs?'
will be displayed for this step.
Press the 'OK' key to change to
24 hour clock.
Note: When 12 hour clock is
set a small 'a' will be displayed for
'AM' and a small 'p' for 'PM'.
Leapfrog Advanced BM.indd 8 Leapfrog Advanced BM.indd 8

Baby alert

You can set your parent unit to
give a warning 'beep' if the noise
levels in your baby's room activate
the red lights on the parent unit.
This is a really useful feature if
the volume of your parent unit
is turned down and you are just
using the noise indication lights to
monitor the noise levels in your
baby's room.
At the parent unit:
1. Press the 'Menu' key and then
use the 'Up/Down' keys to scroll
to 'Sound Alert'. Press the
'OK' key.
2. 'On?' will be displayed. Press
the 'OK' key to turn the alert on
or the 'Menu' key to exit without
changing the setting. You will hear
a confi rmation 'beep' and 'Saved'
will be briefl y displayed.
To turn the baby alert off, follow
the steps above. 'Off?' will be
displayed. Press the 'OK' key. You
will hear a confi rmation 'beep' and
'Saved' will be briefl y displayed.
To change the alert tone volume:
1. Press the 'Menu' key and then
use the 'Up/Down' keys to scroll
to 'Sound Alert'. Press the
'OK' key.
8
26/6/08 09:10:31 26/6/08 09:10:31