General Information; Changing The Batteries - LeapFrog Advanced Baby Monitor Instruction Manual

General information

Changing the parent unit
batteries
The parent unit is supplied with 2
x AAA 1.2V 800mAh Nickel Metal
Hydride Rechargeable Batteries.
To change the batteries please
refer to page 5 of this guide.
• Only use recommended
batteries or those of an
equivalent type.
• Batteries are to be inserted
with the correct polarity.
Follow the diagram in the
battery compartment.
• DO NOT short circuit the
supply terminals.
• Promptly remove exhausted
batteries from the parent and
baby unit and replace if the
operating times have become
reduced over time.
• Remove the batteries from
the parent and baby unit if
they will not be used for an
extended period of time.
• DO NOT attempt to recharge
non-rechargeable batteries.
• Dispose of dead batteries
properly.
• DO NOT mix old and new
batteries or batteries of
different types. (i.e., alkaline/
standard)
Leapfrog Advanced BM.indd 16 Leapfrog Advanced BM.indd 16
• DO NOT incinerate used
batteries.
• DO NOT dispose of batteries
in a fi re, as they may explode
or leak.
• DO NOT attempt to open
the battery outer casing.
• Batteries are harmful if
swallowed, so keep away from
young children.
16
26/6/08 09:10:34 26/6/08 09:10:34