Dimming Curves - Elumen8 ZF LED Zoom Fresnel ELUM090 User Manual

1 channel mode:
Channel Value Function
1 000-255 Master dimmer
(0-100%)
2 channel mode:
Channel Value
1 000-255 Master dimmer (0-100%)
2 000-014
015-044
045-074
075-104
105-134
135-164
165-194
195-224
225-255 S-curve LED dimming curve
Manual dimming mode:
To access the sound active mode, press the "MENU" button on the rear of the unit to show "WhiteSet"
on the LCD display. The unit is now in manual dimming mode. Now use the "UP" and "DOWN" buttons to
set the brightness from "0" - "255" (0 = LED off, 255 = LED at full brightness).
To exit out of any of the above options, press the "MODE" button.

Dimming curves

To access the units dimmer curves, press the "MENU" button on the rear of the unit to show
"Led Linear" on the LCD display. Now use the "UP" and "DOWN" buttons to set the dimming
curve required.
"Led Linear" - LED Linear dimming curve
"Led Square" - LED Square dimming curve
"Led InvSquar" - LED Inverse Square dimming curve
"Led S-Curve" - LED S-Curve dimming curve
"Halgen Linear" - Halogen Linear dimming curve
"Halgen Square" - Halogen Square dimming curve
"Halgen InvSquar" - Halogen Inverse Square dimming curve
"Halgen S-Curve" - Halogen S-Curve dimming curve
To exit out of any of the above options, press the "MENU" button.
www.prolight.co.uk
Please note: Dimming curves for
1 channel mode can be set via
internal menu.
Function
Dimming Curves (set via unit)
Linear Halogen dimming curve
Square Halogen dimming curve
Inverse Square Halogen dimming curve
S-curve Halogen dimming curve
Linear LED dimming curve
Square LED dimming curve
Inverse Square LED dimming curve
ZF LED Zoom Fresnel User Manual
5