To Change The Size Setting Of Side Plate F And Side Plate R - Sharp SF-2030 Service Manual

When using after changing paper size:
2. To change the size setting of side plate F and
side plate R.
Insert side plate F and side plate R into the cassette main unit and
align them on the marking for the desiredsize, and secure the side
plates with fixing screws (2 pcs. each).
Side plate R
Fixing screw
Side plate F
3. To change the size position of the rear end plate.
Remove the rear end plate from its rear storage place, and insert this
into the cassette main unit for the desired size.
When you switch the size to A5 or 8
rotary plate by using the screw that is attached to the rear end
plate.
Fixing screw
⁄ ⁄
1 1
x 5 , fix this plate to the
2 2
Rear end plate
4. To set the size detection spacer.
Reposition the size detection spacer for the desired paper size.
Setting diagram for size detection spacer
(AB system)
A3
A4
A4R
A5
B4
B5
B5R
EXTRA
(Inch system)
8 1/2 x 14
8 1/2 x 11
8 1/2 x 11R
8 1/2 x 5 1/2
11 x 17
EXTRA
5 – 36
Size detection spacer