Side Plate R Assy - Brother HL-4040CN, HL-4050CDN, HL-4070CDW Service Manual

8.56 Side Plate R ASSY

(1) Remove the four cup S M3x6 Taptite screws, four cup B M4x12 Taptite screws and screw
pan (S/P washer) M4x8.
(2) Remove the cup S M4x8 Taptite screw and screw pan (S/P washer) M4x8, and then
remove the Side plate R ASSY from the Frame unit.
Frame unit
Side plate R ASSY
Taptite, cup B M4x12
(Tightening torque: 0.90 ±0.1 N m)
*1
Tightening Note:
When tightening the screw, slowly turn it counterclockwise (in the direction to loosen the
screw) with your hand until you feel that the screw is a little dropped in the hole. Then,
slightly turn it clockwise (in the direction to tighten the screw) with your hand and tighten
it according to the specified torque with a screwdriver.
<A view>
"A"
Taptite, cup B M4x12
(Tightening torque: 0.90 ±0.1 N m)
Taptite, cup S M3x6
*1
Fig. 3-170
3-115
Screw pan (S/P washer) M4x8 DB
Taptite, cup S M3x6
Taptite, cup S M4x8
Taptite, cup S M3x6
Screw pan (S/P washer)
M4x8 DB
Taptite, cup B M4x12
(Tightening torque: 0.90 ±0.1 N m)
Taptite, cup S M3x6
*1
<Right side>
Confidential
*1