8.46 Laser Unit/ Hook Slope
(1) Remove the four cup S M3x8 Taptite screws, and then remove the two Hook slopes.
(2) Remove the nine cup S M3x6 Taptite screws (8 pieces from the top and 1 piece from the
front side), and then remove the Scanner cover.
Taptite, cup S M3x6
Assembling Note:
When assembling the Scanner cover, secure the screws in the order of the numbers
which are indicated on the Scanner cover.
Taptite, cup S M3x8
Frame unit
Fig. 3-131
Scanner cover
Fig. 3-132
3-93
Hook slope
<Front side>
Taptite, cup S M3x6
Taptite, cup S M3x6
Frame unit
<Front side>
Hook slope
Taptite, cup S M3x8
Taptite, cup S M3x6
Confidential