Brother HL-4040CN, HL-4050CDN, HL-4070CDW Service Manual page 86

(5) Remove the cup S M3x8 Taptite screw and three cup B M4x12 Taptite screws.
(6) Release the three Hooks on the bottom and the two hooks on the back side, and then
remove the Side cover L ASSY.
Note:
When removing the Side cover L ASSY, pay attention to the Wire support rope.
Taptite, cup B M4x12
Hooks
Side cover L ASSY
Taptite, cup S M3x8
(7) Remove the two cup B M4x12 Taptite screws and two cup S M4x8 Taptite screws.
(8) Release the one Hook on the front side, two Hooks on the bottom and the two Hooks on
the back side, and then remove the Side cover R ASSY.
Note:
When removing the Side cover R ASSY, be careful not to damage section "A".
"A"
Hook
Hooks
Fig. 2-12
8a
Hook
Taptite, cup S M4x8
Fig. 2-13
<Left side>
Taptite, cup B M4x12
Taptite, cup S M4x8
8b
Taptite, cup B M4x12
2-9
Wire support rope
Hooks
Side cover R ASSY
<Right side>
Hooks
Confidential