Fisher & Paykel RF106RDWX1 Installation Instructions And User Manual page 30

PROBLEM
Unfamiliar noises.
Door alarm sounds
continuously
and a fault code
appears.
Exterior of cabinet
is warm.
Moisture build-up
on the exterior
appliance
surfaces.
Moisture build up
on the interior
glass door.
Door handle out
of alignment.
Excessive gasket
noise.
Door does not
shut properly.
28
TROUBLESHOOTING
POSSIBLE CAUSES
The cabinet is not stable
or level.
This is dependent on the
displayed fault code.
This is normal.
Not unusual during
periods of high humidity.
Not unusual during
periods of high humidity.
Prolonged or frequent
door openings.
With time and usage,
movement may occur.
May be due to a build-up
of dirt and/or grime.
Cabinet not stable or level.
The gasket is dirty.
The shelves are out of
position.
Door obstruction.
wHAT TO DO
Level the cabinet. Refer to the
'Installation instructions' section or
refer to 'User warnings and sounds'
section.
Please take note of the fault code and
contact the Customer Care Centre.
Wipe dry with a clean, lint-free cloth.
Wipe dry with a clean, lint-free cloth
and activate 'Demist' function. Refer
to 'Operating instructions – Special
functions' section.
Minimise door openings to allow the
temperature to stabilise. Also check
the gasket is sitting flat and sealing
tightly.
Refer to 'Installation instructions'
sections.
Gasket needs cleaning. Refer to
'Cleaning care – Exterior' section.
Level the cabinet. Refer to the
'Installation instructions' section.
Gasket needs cleaning. Refer to the
'Cleaning care – Exterior' section.
Realign shelves. Refer to the 'Cleaning
care – Interior' section.
Check for obstructions eg protruding
wine bottles, shelves out of position.