Product installation
Your Wine Cabinet is fitted with rear rollers designed for moving the product in the
●
●
forwards and backwards direction.
Avoid moving the product in a sideways direction as this may damage the floor
●
●
covering/surface.
Your Wine Cabinet will arrive with the front feet raised making moving the product into
●
●
its final location a simple task.
Move the Wine Cabinet into its final position making sure there is correct clearances
●
●
between the product and surrounding cabinetry.
Aligning your wine Cabinet with cabinetry
Align the sides of the product with the cabinetry by adjusting the hinge side front foot.
●
●
Adjust the handle side foot until it touches the floor and takes a small amount of weight.
●
●
Once the product is in place and aligned with cupboards/alcove gently push on the
●
●
front top and check if the product is rocking or stable.
Levelling your wine Cabinet
It is important that all four corners of
●
●
the Wine Cabinet base are supported
firmly on the floor to eliminate any
cabinet movement.
Installing the appliance on a soft or
●
●
uneven/unlevelled floor may result
in twisting of the cabinet and poor
sealing of the door.
The cabinet has adjustable feet, which
●
●
can be used to level the product.
Remove the feet cover, turn the feet
clockwise to raise the appliance
or counter-clockwise to lower the
appliance, until it is stable. This will
ensure a good door closing action.
Replace the feet cover.
The front levelling foot on the hinge
●
●
side should take majority of the
cabinet's weight and be stable, ie the
cabinet should not rock or wobble.
INSTALLATION INSTRUCTIONS
Counter-clockwise
to raise feet
To remove, pull the feet
cover towards you
Clockwise to
lower feet
9