Fisher & Paykel RS60RDWX1 Installation Instructions Manual

Installation instructions
Please follow the installation steps below to ensure your appliance operates correctly.

Power

• The appliance must be installed so the plug is accessible.
• To ensure that the appliance is not accidentally switched off, connect your Wine Cabinet to its own power point.
Do not plug in any other appliance at this power point.
• For power requirements, please refer to the serial plate located on the rear of the cabinet.
• It is essential that the appliance is properly grounded (earthed).
• Connect the appliance to the electrical supply (220 V – 240 V 50Hz) with the fitted plug and lead.
• Connections to the mains supply should be in accordance with local regulations.

Location

• Your Wine Cabinet should not be located in direct sunlight or next to any heat generating appliance such as a
cooktop, oven or dishwasher.
• The appliance should not be located in garages or on carpeted floors.
• This appliance is intended to be used in indoor ambient temperatures between 16°C and 25°C. Do not operate
this appliance outside the specified ambient ranges as performance may be compromised.
• This appliance is intended to be used in household and similar applications such as:
◦ Staff kitchen areas in shops, offices, and other working environments;
◦ Domestic farm houses and by clients in hotels, motels and other residential type environments;
◦ Domestic bed and breakfast type environments;
◦ Domestic catering and similar non-retail/non-commercial applications.

Ventilation and installation

To ensure adequate ventilation for your Wine Cabinet, see recommended

Product installation

• Your Wine Cabinet will arrive with the front feet raised to make moving the product into its final location a simple
task.
https://producthelp.fisherpaykel.com/nz/Cool/Wine_Cabinets/RS60RDWX1/User_Guide_RS60RDWX1/03_Installation_instruc...
'Product and cabinetry dimensions'.
Updated: Mon, 27 Jul 2020 18:14:24 GMT
Powered by
1