Wireless Remote Control Manual Function Description; Background Light - Promaster Timer Remote 4964 Manual

The Speaker and Release Lamp
The following illustration shows when a beep will sound (
of 5s, and exposure time of 4, and an interval of 9s.
End Shooting
Shooting will end automatically when the selected number of shots has been taken. To end shooting
before all photographs have been taken, press the START/STOP button.

Wireless remote control manual function description

1. Turn OFF the camera, transmitter and receiver. Remove the remote socket cover from the
camera.
2. Connect the receiver to the camera and turn the camera ON.
3. Turn ON the transmitter and receiver.
4. Press the shutter release button on the transmitter half way. The transmitter will send the signal
for focusing to the receiver. The green indicator light will illuminate on the transmitter and
receiver. The camera is in the focusing state until either the shutter button on the transmitter is
released or pressed completely.
5. Full-pressing the shutter release button of the transmitter will send the signal to take an
exposure. The red indicator light will illuminate on the transmitter and receiver and the camera's
shutter will release.
a) The shutter release lock function does not work in the wireless mode.

Background Light

Press the channel increase or reduce button of receiver to turn on the background light of the receiver's
control panel.
) and the release lamp flash ( ) with a delay