Setting The Remote For Time Delay Exposures (Wired And Wireless); Delay(De), Exposure/Bulb(Bu) And Interval Settings (Int) - Promaster Timer Remote 4964 Manual

Setting the Remote for Time Delay Exposures (Wired and Wireless):

1. Setting your camera
a) Connect the remote to the camera and turn it ON.
b) Adjust the camera setting.
Exposure Mode
Shutter Speed
Interval Timer
Focus Mode
Continuous
2. Setting the transmitter
a. Press the SET button (7). The SET icon on the Control Panel (17) will flash.
b. Adjust the following settings:
Option
Just like the self-timer on your camera, the timer remote
DE switch allows you to set any delay (in 1 second increments)
up to 99 hours, 99 minutes and 99 seconds.
It allows you to take time exposures up to 100 hours in
BU
length.
The Interval Timer can be set to any time period up to 100
hours as well. If you set it to 10 minutes, for example, one
INT
exposure will be taken every 10 minutes until either the film
runs out or the Exposure Count limit has been reached.
This setting permits you to set the number of exposures that
N
will be taken, up to 999 shots.
Speaker ON/OFF

Delay(DE), Exposure/BULB(BU) and Interval Settings (INT)

IMPORTANT:
Please ensure the interval time is longer than exposure time by at least 2 seconds.
Auto Focus or Manual
Description
M (manual)
BULB
OFF
S (single frame)
Supported Setting
0s to 99hrs 59min 59s
0s to 99hrs 59min 59s
1s to 99hrs 59min 59s
1 to 999 or -- (unlimited)
ON/OFF