Table of Contents
Advertisement
The Speaker and Release Lamp
The following illustration shows when a beep will sound (
of 5s, and exposure time of 4, and an interval of 9s.
End Shooting
Shooting will end automatically when the selected number of shots has been taken. To end shooting
before all photographs have been taken, press the START/STOP button.
Manual Function – wired operation
1.
Select the M function on the remote and choose any shutter speed on the camera.
2.
Half press the shutter button to focus.
3.
Fully press the shutter button to release the shutter.
4.
For long exposures, set the camera to the BULB setting. After pressing the shutter button, slide the
shutter button to the HOLD position. This will lock the cameras shutter OPEN.
5.
Slide the button in the opposite direction to release the lock.
6.
Release the button to end the exposure.
Background Light / Lock Button
Press the Background Light / Lock Button for 1 second to turn on the LED lamp on the control panel.
Press the Background Light / Lock Button for 2 seconds to enable the Button Lock.
Press the Background Light / Lock Button for 2 seconds to disable the Button Lock
) and the release lamp flash (
) with a delay
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Timer Remote 4964 and is the answer not in the manual?
Questions and answers